Low cost high speed wood core wpc solid door frame making machine

Group WPC Door Extrusion Machine
Min. Order 1 set
Terms of Payment L/C, T/T
Update Time 2020-02-25
Item specifics
materialPVC+wood WPC
New type low cost solid WPC door frame making machine project

We are professional for wood plastic WPC machine, for adopting the market requirements, we have developed special co-extrusion technology for making low cost and high quality WPC+LVL door frame .

Avoid the disadvantage of traditional WPC solid door frame,such as heavy weight, high cost, easy deformation,weak nail/screw holding; we have developed WPC layer+ LVL core co-extrusion technology for making low cost WPC solid door frame

The inner core of the profile can be LVL wooden, MDF profile, Aluminum Profile, steel post.

The outer layer can be WPC layer or PVC layer, 4-5mm thickness shall be enough.

Details for the WPC and core door frame making machine
wpc co-extrusion extruder
The extruder for the outside layer WPC material,
The haul off device feeder the inner core into the co-extrusion mould
The mould and water tank for door frame
The new type solid door frame can be beeter colling ,so the production speed can reach 0.5-0.8 m/min
wpc and wood core door frame prosuction line

For the WPC+LVL door frame, as the inner core size is fixed and to be stably and continuously feeding to the extrusion line, so it is very easy for machine operators to control the product quality and forming size, and the 4-5mm outer WPC layer is also easy to be controlled by the die and calibrators. So the production defective rate and wast is very low.

Solid door frame making machine

For the WPC+LVL door frame,the inner is high density LVL (Laminated Veneer Lumber) which has advantage of high strength, high toughness, and resistant of fatigue failure caused by periodic stress, and high nail/screw holding strength. So the nail/screw holding strength of WPC+LVL door frame is as high as original LVL product.

Equipment list forNew Type WPC door profile extrusion line
Auto Haul off device
65/132 Conical double screw Extruder with feeder
Water and vacuum Calibrating machine
Haul off machine
Cutting machine
Product stacker
Advantage of WPC and wood core solid door frame

Advantage of WPC+core co-extrusion profile:Low cost

Advantage of WPC+core co-extrusion profile:High production speed

For the full WPC door frame, it is hard to be cooled fully inside, even if you increase the length of calibrator and water tank, the production speed is very limited to 0.3-0.5m/min because of the big thickness and high heat inside of the products. And the products after production shall also get problem of deformation because of afterheat inside of the products which can not be fully cooled on the extrusion line.

For the WPC+LVL door frame, the inner is LVL core which is in normal temperature, the LVL core shall only need to be heated at the surface before feeding to the extrusion line. And the WPC layer is only 4-5mm thickness, so the complete product can be easy cooled by the calibrators and water tank. So the production speed can be 0.5-0.8m/min and can be fully cooled on the extrusion line so that the product shall not get deformation after production.

Hegu Service